***
SYN5201 type time frequency synchronizing equipment comprehensive calibrator
  • 产品详情

Product overview

SYN5201 The time and frequency synchronization equipment calibrator is a portable time and frequency comprehensive test equipment designed and developed by Xi'an synchronous Electronic Technology Co., Ltd., which is developed by ourselves. The clock calibrator is a comprehensive power system clock tester with high precision GPS time reference source, frequency reference source, time measurement, frequency measurement and calibration, IRIG-B time code generation and decoding, time delay correction (phase-shifting) and other modules.

The clock calibrator provides a portable multi-function clock calibrator that meets the needs of power system, covers the time information and time signal of the existing power system and all kinds of interface channels and protocols. It has the characteristics of light and portable, standby battery, and suitable for various field testing and checking environment.

Product function

1)   Time measurement function A time interval detector with a resolution of 0.1 microseconds can measure the time difference (time interval) between clock error or pulse signal (TTL level or empty contact point), so as to complete the timing accuracy check of clock equipment.

2)   Frequency calibration (frequency calibration) function - It can calibrate external input 1MHz, 5MHz, 10MHz crystal frequency or rubidium frequency.

3)   Frequency measurement function - The 10S/1S/0.5S gate time can be selected, and the frequency value of the 30Hz 20MHz frequency signal is directly read from the external input.

4)   Time pulse output - Output 1PPS (GPS) and 1PPS (local second) signal synchronized with GPS, TTL interface.

5)   Synchronous pulse output - Output 9, 1, 5, 10, 20, 25, 50, 100, 200, 1KPPS 9 kinds of synchronous pulse signal 1 road, TTL level interface.

6)   Frequency output -1MHz The standard frequency signals of 5MHz and 10MHz are 1 ways and TTL interfaces.

7)   IRIG B time code demodulation and decoding function - It can demodulate and decode the external input B (DC) code (TTL/RS422/RS232 interface) or B (AC) code, output B code 1PPS demodulation seconds for testing, and form B code clock.This completes the verification of the correctness of various output interfaces of IRIG B codes for external clock devices.

8)   IRIG - time code generation function - Output IRIG - B code.Among them, the B (AC) AC code is 600 balanced output, and the B (DC) DC code outputs three channels, namely TTL, RS232 and RS422 interface.To check the external device B code input interface.

9)   Pulse delay (phase-shifting) function It can choose the digital delay (Yi Xiang) or no delay (not Yi Xiang), single time or continuous delay (Yi Xiang) for the 1PPS /1PPM inside the machine, and output the four way of testing the "air contact" pulse signal.And the delay of each output signal can be preset by four buttons and a six bit dialing switch.

10) Display function - 2 * 20 character backlit LCD character display, first line direct reading display time, month, day, minute, second, real-time Beijing time. , There are 17 LED lights indicating the working state of their respective units.

11) The machine is equipped with GPS controlled 10MHz high precision frequency standard.

12) Two RS232 interface outputs Real time Beijing time, clock difference (Shi Cha), IRIG-B code clock time, minutes, seconds, year, month, day, 3 minutes, seconds, milliseconds, microseconds.

13) Output TTL interface 1PPS (GPS), 1PPS (local clock), 1PPS (B code seconds), 1PPM (GPS) all the way.

Product characteristics Clock tester

A)   High accuracy and high cost performance.

B)   Complete functions and reliable performance.

C)   High accuracy, high reliability, convenience and intuition.

D)   Comprehensive, intelligent and portable.

Typical application

1)   Power supply company, transmission and Transformation Company and power plant;

2)   Measuring and verifying various clock devices in substations / power plants;

3)   The factory inspection (FAT), the engineering acceptance (SAT) and the laboratory test of the clock device.

4)   Regular or unscheduled testing and verification of power network with time marking automation system, computer data exchange network, event sequence recording device, fault recorder and microcomputer relay protection device are carried out.

Technical index


Input signal

GPS receiver

Frequency point

L1

Timing accuracy

Better than 100ns

Tracking sensitivity

-160dBm

GPS antenna

Number

1 sets

shape

mushroom-shaped umbrella

Line length

30 meters

Physical interface

BNC

Bracket

Mushroom head mounting bracket

10MHz signal

Routes

1 way

wave form

sine

level

+ + 5 d PM

Physical interface

BNC

IRIG-B (AC)

Interface

Three core aerial interpolation

IRIG-B (DC)

Interface

BNC joint / three core aerial interpolation

Time measurement accuracy

Less than or equal to 100ns

output signal

Synchronous pulse

Routes

9 way (1 points per frequency)

frequency

1, 5, 10, 20, 25, 50, 100, 200, 1KPPS

Interface

TTL

1MHz/5MHz/10MHz

Routes

1 roads

IRIG-B (AC)

Interface

Three core aerial interpolation

IRIG-B (DC)

Interface

BNC joint / three core aerial interpolation

1PPS pulse signal

Routes

1 way

level

TTL

synchronization error

Less than 100ns

Physical interface

BNC

RS232C serial port

Routes

1 way

level

RS232C

Serial port format

RMC statement

Physical interface

DB9

Environmental characteristics

working temperature

0 C ~ + 50 C

relative humidity

Less than 90% (40 C)

Storage temperature

-30 C ~ + 70 C

Power supply

AC 220V + 10%, 50Hz + 5%, power less than 30W

Chassis dimensions

1U, 19 "standard chassis (upper rack) 482mm (wide) X300 (deep) x44mm (high)

Option

GPS Beidou dual-mode receiver, constant temperature crystal oscillator OCXO, rubidium atomic oscillator, lightning arrester, customized antenna cable (50 meters, 80 meters, 100 meters, etc.), 1PPS output RS232C, RS422/485, etc., serial output TTL, RS422/485, etc., expand the output path, 1U standard chassis, customize wide temperature enclosure Products, according to customer requirements customized products.


Guide for selection of related products

Model

Input signal

Testing function

characteristic

Other

SYN5104 type time integrated parameter tester

GPS Beidou

Time standard source, time difference measurement, time accuracy, frequency accuracy, message accuracy, Zhou Bo measurement, temperature and humidity measurement, time recording

Most time frequency signals can be tested.

4U, 19 "(upper rack)

AC220V, 30W

Model SYN5106 high precision clock tester

GPS Beidou

Time standard source, time difference measurement, time accuracy, frequency accuracy, timing error measurement

Clock test of electric energy meter

4U, 19 "(upper rack)

AC220V, 30W

SYN5301 millisecond meter time calibrator

10MHz reference

Verification of mechanical stopwatch, electronic stopwatch, pointer type electric stopwatch, millisecond meter, digital electric stopwatch and so on, combined with 4 functions of stopwatch calibrator, day difference meter / calibrator, pointer type electric stopwatch calibrator, standard time interval generator and so on.

High accuracy and powerful function

3U, 19 "(upper rack)

AC220V, 30W

SYN5301A type stopwatch verification fixture

Control electrical signal

Verification of mechanical stopwatch, electronic stopwatch, and various kinds of timer and other fixtures.

Flexible and convenient, high automation.

Module (360x110x140mm)

SYN5301C precision photoelectric converter


One precision laser source, one high-precision photodetector, two sets of brackets.

High precision

AC220V power adapter

SYN5602 calibrator for electronic parking time charge device

GPS Beidou

At the same time, 1~18 electronic parking meter (parking meter) or parking area electronic time charge device can be checked at the same time.

The targets are all superior to the requirements of the national metrological verification regulation of JJG1010-2013 electronic parking timed tariff meter.

Portable suitcase

AC 220V + 10%

SYN5603 GPS time (event) recorder

GPS

3 pulse time recording

High accuracy

1U, 19 "(upper rack) AC 220V + 10%

SYN5605 multi channel time interval measuring instrument

Reference 10MHz

Simultaneous measurement of 36 pulse signals

High precision, multi-channel simultaneous measurement

3U, 19 "(upper rack) AC 220V + 10%

SYN5605A digital time interval measuring instrument

Reference 10MHz

Measuring the time difference between 1 or 2 pulse signals

High precision time interval measurement

3U, 19 "(upper rack) AC 220V + 10%

SYN5605C type time correlated single photon counting system

Reference 10MHz

Simultaneous measurement of multiple pulses

PS magnitude accuracy

3U, 19 "(upper rack) AC 220V + 10%

SYN5607 type phase meter


The phase difference is measured at 0 degrees to 360 degrees or + 180 degrees.

Accuracy 0.1 degree

3U, 19 "(upper rack) AC 220V + 10%

SYN5608 digital phase standard


Output two adjustable sine wave with high precision phase, ultra wide voltage range and ultra low distortion.

Accuracy 0.1 degree

3U, 19 "(upper rack) AC 220V + 10%

Type SYN5610 pulse generator

Reference 10MHz

Single channel, dual channel output

High precision

4U, 19 "standard chassis.

SYN5619 phase noise analyzer


Phase noise and stability test for 500kHz-30MHz frequency simultaneously

Less than 1E-13/1S (5E-14/1s (typical value))

1Hz@5MHz<-140dBc (<-145dBc (typical value))

4U, 19 "standard chassis.

Option

GPS Beidou dual-mode receiver, constant temperature crystal oscillator OCXO, rubidium clock, lightning arrester, customized antenna cable (50 meters, 80 meters, 100 meters, etc.), expand the output path, PTP measurement, NTP measurement, 4U standard chassis, network photoelectric conversion kit, according to customer requirements customized products.Customize products with wide temperature range, and make similar products according to customer's requirements.

Home
Customer service
shopping cart
Add to Cart
BUY