Xi'an SYNC

Input signal

GPS/ Beidou two generation dual mode receiver

Frequency point

L1, B1

Timing accuracy

Less than 30ns

Tracking sensitivity

-160dBm

GPS Beidou two generation dual mode antenna

Number

1 sets

shape

mushroom-shaped umbrella

Line length

30 meters

Physical interface

BNC

Bracket

Mushroom head mounting bracket

Sine / pulse

Routes

2 way

wave form

1 way sine

1 way pulse

level

TTL level: 0V~7V; trigger level: 2.5V

AC amplitude (nominal 10MHz): 1Vpp~10Vpp

frequency range

100uHz-40MHz (pulse)

10Hz-30MHz (sine)

Measurement accuracy (nominal 10MHz)

Less than 2E-8/1s

Less than 2E-9/10S

Less than 5E-10/100S

Less than 5E-11/1000S

Less than 5E-12/10000S

Time difference measurement

Routes

2 way

level

2 way TTL

Trigger edge

Rising / falling edge

Measurement contents

Single channel measurement / dual channel measurement /1PPS measurement /1PPM measurement /1PPH measurement

Measurement method

Single and continuous

measurement accuracy

Less than 100ns

Time record

Routes

4 way pulse 1 (TTL) / pulse 2 (TTL) / serial port (RS232) / serial port (RS422)

Trigger edge

Rising / falling edge

measurement accuracy

Less than 100ns (TTL)

The SOE signal is measured by this function.

Zhou Bo measurement

Routes

1 way AC 220V

Voltage

88~264VAC

frequency

47~63Hz

Measurement accuracy:

+ 0.005Hz/s

Temperature and humidity measurement

Temperature measurement range

0~50 C

Accuracy of temperature measurement

25 C + 2 C

Humidity measurement range

20%~90%

Humidity measurement accuracy

25 C + 5%

Serial port measurement index

Routes

2 way

level

1 way serial port (RS232)

1 way serial port (RS422)

baud rate

4800/9600/19200/38400/57600/115200 bit/s

IRIG-B

level

1 way TTL DC

1 way RS232C DC

1 way RS422/485 DC

1 way 600 Omega balanced communication

1 way unbalanced communication

Measurement standard

National military standard (2991A-2008) / American Standard (STD 200-04)

Network input signal

NTP/SNTP test

Routes

1 way

Physical interface

RJ45

Agreement

NTP/SNTPV1.0-V4.0

accuracy

Less than 0.2us

PTP test

Routes

1 way

Physical interface

RJ45

Agreement

IEEE STD 1588 (PTPV2)

Testing accuracy

Less than 50ns

transport Signal out

10MHz output

Routes

1 way

level

sine

Range

More than 7dBm default 9dBm + 1dBm

Accuracy

Less than 1E-12 (track to satellite signal 24 hours after average)

Less than 5E-10 (mean value of satellite signal failure after 24 hours)

Output impedance

50 ohm

Physical interface

BNC

1PPS pulse signal

Routes

1 way

level

TTL

synchronization error

Less than 100ns

Physical interface

BNC

IRIG-B code output

Routes

5 way

level

1 way TTL

1 way RS232C

1 way RS422/485

1 way balanced communication

1 way unbalanced communication

standard

National military standard (2991A-2008) / American Standard (STD 200-04)

Serial port output

Routes

1 way

level

RS232C

Serial port format

RMC statement /ZDA statement /ST statement

baud rate

4800/9600/19200/38400/57600/115200

Physical interface

DB9

Environmental characteristics

working temperature

0 C ~ + 50 C

relative humidity

Less than 90% (40 C)

Storage temperature

-30 C ~ + 70 C

storage

Routes

2 way (1 road USB (reserved), 1 road DB9 head)

U disk storage (option)

Compatible with the vast majority of U disk to meet the USB2.0 protocol, insert the U disk to wait for 5S, can automatically store, as long as the test starts, the data will be automatically stored, stop testing will end the storage.

Serial port communication

Send real-time measurement data to upper computer, baud rate 115200bit/s

Power supply

AC 88~264VAC, 47~63Hz, power less than 40W, battery: 7AH

Chassis dimensions

4U, 19 "standard chassis.

Option

Rubidium atomic oscillator, lightning arrester, customized antenna cable (50 meters, 80 meters, 100 meters, etc.), expand the output path, PTP measurement, NTP measurement, 4U standard chassis, network photoelectric conversion kit, customized products according to customer requirements.

Model

Input signal

Testing function

characteristic

Other

SYN5104 type time integrated parameter tester

GPS Beidou

Time standard source, time difference measurement, time accuracy, frequency accuracy, message accuracy, Zhou Bo measurement, temperature and humidity measurement, time recording

Most time frequency signals can be tested.

4U, 19 "(upper rack)

AC220V, 30W

Model SYN5106 high precision clock tester

GPS Beidou

Time standard source, time difference measurement, time accuracy, frequency accuracy, timing error measurement

Clock test of electric energy meter

4U, 19 "(upper rack)

AC220V, 30W

SYN5301 millisecond meter time calibrator

10MHz reference

Verification of mechanical stopwatch, electronic stopwatch, pointer type electric stopwatch, millisecond meter, digital electric stopwatch and so on, combined with 4 functions of stopwatch calibrator, day difference meter / calibrator, pointer type electric stopwatch calibrator, standard time interval generator and so on.

High accuracy and powerful function

3U, 19 "(upper rack)

AC220V, 30W

SYN5301A type stopwatch verification fixture

Control electrical signal

Verification of mechanical stopwatch, electronic stopwatch, and various kinds of timer and other fixtures.

Flexible and convenient, high automation.

Module (360x110x140mm)

SYN5301C precision photoelectric converter

One precision laser source, one high-precision photodetector, two sets of brackets.

High precision

AC220V power adapter

SYN5602 calibrator for electronic parking time charge device

GPS Beidou

At the same time, 1~18 electronic parking meter (parking meter) or parking area electronic time charge device can be checked at the same time.

The targets are all superior to the requirements of the national metrological verification regulation of JJG1010-2013 electronic parking timed tariff meter.

Portable suitcase

AC 220V + 10%

SYN5603 GPS time (event) recorder

GPS

3 pulse time recording

High accuracy

1U, 19 "(upper rack) AC 220V + 10%

SYN5605 multi channel time interval measuring instrument

Reference 10MHz

Simultaneous measurement of 36 pulse signals

High precision, multi-channel simultaneous measurement

3U, 19 "(upper rack) AC 220V + 10%

SYN5605A digital time interval measuring instrument

Reference 10MHz

Measuring the time difference between 1 or 2 pulse signals

High precision time interval measurement

3U, 19 "(upper rack) AC 220V + 10%

SYN5605C type time correlated single photon counting system

Reference 10MHz

Simultaneous measurement of multiple pulses

PS magnitude accuracy

3U, 19 "(upper rack) AC 220V + 10%

SYN5607 type phase meter

The phase difference is measured at 0 degrees to 360 degrees or + 180 degrees.

Accuracy 0.1 degree

3U, 19 "(upper rack) AC 220V + 10%

SYN5608 digital phase standard

Output two adjustable sine wave with high precision phase, ultra wide voltage range and ultra low distortion.

Accuracy 0.1 degree

3U, 19 "(upper rack) AC 220V + 10%

Type SYN5610 pulse generator

Reference 10MHz

Single channel, dual channel output

High precision

4U, 19 "standard chassis.

SYN5619 phase noise analyzer

Phase noise and stability test for 500kHz-30MHz frequency simultaneously

Less than 1E-13/1S (5E-14/1s (typical value))

1Hz@5MHz<-140dBc (<-145dBc (typical value))

4U, 19 "standard chassis.

Option

GPS Beidou dual-mode receiver, constant temperature crystal oscillator OCXO, rubidium clock, lightning arrester, customized antenna cable (50 meters, 80 meters, 100 meters, etc.), expand the output path, PTP measurement, NTP measurement, 4U standard chassis, network photoelectric conversion kit, according to customer requirements customized products.