Product overview
SYN052 The four frequency TCXO quartz crystal oscillator outputs 16.116MHz, 97.116MHz, 181.184MHz and 218.616MHz, and the four output frequencies F1, F2, F3, F4 are controlled by power V1, V2, V1, and F3.That is to say, the frequency of a certain voltage output, such as the V3 voltage, will output the F3 frequency.
Product characteristics
1) Small volume High cost performance;
2) Multi frequency output;
3) High reliability;
Typical application
A) Communications, navigation, radar, reconnaissance and other fields. 。
Technical index
frequency | F1:16.116 MHz, F2:97.116MHz, F3:181.184 MHz, F4:218.616MHz | |
wave form | sine wave | |
output power | More than 0dBm (50 ohm load) | |
Clutter suppression | F1:16.116 MHz | -80dbm (+ 10 MHz); -80dbm (40.5 MHz + 2 MHz); other -40dbm |
F2:97.116MHz | -80dbm (+ 10 MHz); -80dbm (121.5 MHz + 2 MHz); other -40dbm | |
F3:181.184 MHz | -80dbm (+ 10 MHz); -80dbm (156.8 MHz + 2 MHz); other -40dbm | |
F4:218.616MHz | -80dbm (+ 10 MHz); -80dbm (243 MHz + 2 MHz); other -40dbm | |
Factory calibration | Less than or equal to 1ppm | |
Annual aging | Less than or equal to 1ppm | |
temperature characteristic | Less than + 2ppm (-55 ~ 70 C) | |
Voltage characteristic | Less than or equal to 0.1ppm (voltage change is + 5%). | |
phase noise @ 100MHz @ 25 C + 2 C | Less than -110dBc/Hz @1KHz | |
Less than -120dBc/Hz @10KHz | ||
Less than -130 dBc/Hz @100KHz | ||
Less than -135 dBc/Hz @1MHz | ||
working voltage | +5VDC + 5%; V1, V2, V3, V4 | |
Working current | Less than 40mA | |
Stable power consumption | Less than 0.2W | |
working temperature | -55 ~ +70 C | |
Storage temperature | -55 ~ +90 C | |
Package size | 52 x 42 x 14mm | |
Package size map:

Pin function:
Pin | function |
V1 | F1 voltage input terminal |
V2 | F1 voltage input terminal |
V3 | F1 voltage input terminal |
V4 | F1 voltage input terminal |
OUT | Frequency output |
GND | Ground GND |