Product overview
SYN020-100MHz The constant temperature crystal oscillator outputs 1 ultra low phase noise 100MHz sinusoidal signals.
Product characteristics
1) Small volume High cost performance;
2) Background noise of ultra low phase noise is superior to that of background noise. -170dBc/Hz ;
3) High reliability;
Typical application
A) Communications, navigation, radar, reconnaissance and other fields. 。
Technical index
frequency | 100MHz |
wave form | sine wave |
output power | More than 7dBm (50 ohm load) |
harmonic | Less than -30dBc |
stray | Less than -80dBc |
Factory calibration | Less than or equal to 0.01ppm |
Annual aging | Less than or equal to 0.5ppm (first year) |
Daily aging rate | Less than or equal to 0.01ppm |
temperature characteristic | Less than + 0.5ppm (-40 ~ 70 c @ 25 C) |
Voltage characteristic | Less than + 0.05ppm (Vs + 5%) |
Load characteristics | Less than + 0.05ppm (Load + 10%) |
phase noise @ 100MHz @ 25 C + 2 C | Less than -130dBc/Hz @100Hz |
Less than -160dBc/Hz @1KHz | |
Less than -170 dBc/Hz @10KHz | |
Less than -170 dBc/Hz @100KHz | |
Traction range | More than or equal to 0.5ppm voltage control voltage 0 ~ 9V, positive polarity, central voltage: 4.5 + 0.1V |
working voltage | 12 + 5%VDC |
Working current | Less than 350mA startup time |
Less than 150mA @25 C, steady state | |
working temperature | -40 ~ +70 C |
Storage temperature | -55 ~ +105 C |
Package size | 20.2 x 20.2 x 11mm |
Package size map:

Pin function:
Pin | function |
One | Voltage control input VC |
Two | Reference voltage Vref\NC |
Three | Ground GND |
Four | Signal output OUT |
Five | Power input VS |