***
SYN5631 type frequency response analyzer
  • 产品详情

Product overview

The SYN5631 type frequency response analyzer is a frequency characteristic tester developed in accordance with the calibration specification of JJF 1710-2018 frequency response analyzer. The analyzer can directly analyze the frequency characteristics of the system, including amplitude frequency characteristics and phase frequency characteristics. The test system outputs the response signal excited by the built-in signal source of the frequency response analyzer, and inputs it to the frequency response analyzer for processing and processing. Finally, the frequency response results are displayed in polar coordinates (gamma, theta) or log polar coordinates (log gamma, theta).

Frequency response analyzer is widely used in aviation, aerospace, navigation, electrochemistry, materials research, mechanical manufacturing, rotating machinery fault monitoring, fault diagnosis, modal parameter identification and other fields.

Product function

1) amplitude frequency characteristic and phase frequency characteristic test;

2) large touch screen for real-time display. SYN5631 type frequency response analyzer.Png

3) support logarithmic and linear detection;

4) can be directly set through the serial port.

Product characteristics

A) highly integrated and highly precise.

B) good stability and reliable performance.

C) liquid crystal display panel is simple and intuitive.

Typical application

1) aviation, aerospace, navigation and military industries;

2) vibration analysis of machinery manufacturing, fault monitoring and diagnosis of large machinery;

3) design and debugging of automatic control system and servo system.

4) the impedance and resonance test of electronic components, piezoelectric components, filter debugging of high voltage network, pile foundation detection, automatic control system research and teaching.

Technical index

output Characteristic

frequency range

20Hz ~ 50MHz

Range

More than 0.5Vrms

Distortion

Less than 2%

DC offset

+ 4V

Input impedance

50 ohm / high resistance

Output attenuator

0 ~ 80dB, 1dB step.

Input characteristics

Input gain

10 ~ -30dB, 10dB step.

Phase range

0 degrees to 360 degrees

Phase resolution

1 degrees

Input signal amplitude

0.1V is less than A or less than 10V

Environmental characteristics

working temperature

0 C ~ + 50 C

relative humidity

Less than 90% (40 C)

Storage temperature

-30 C ~ + 70 C

Power supply

AC 220V + 10%, 50Hz + 5%, power less than 75W

Chassis dimensions

Three U, 19 "standard chassis (upper rack) 482mm (wide) X300 (deep) x1 Eight 0mm (high)

Option

extend output Customized products with wide temperature range and customized products according to customer requirements.



Home
Customer service
shopping cart
Add to Cart
BUY