Product overview
The SYN4901 type high precision time and frequency transfer equipment is a long distance time frequency optical fiber transmission equipment designed and developed by Xi'an synchronous Electronic Technology Co., Ltd., which is equipped with high-precision constant temperature crystal oscillator 0CXO or rubidium atomic clock. It receives external clock signals such as Beidou two generation /GPS/GLONASS satellite signal, dedicated optical fiber signal, IRIG-B code, E1 and so on, outputs special clock signals such as optical fiber clock signals and PTP/NTP/E1/ AC and DC IRIG-B/TOD/1PPS/1PPM/10MHz.
Through the cascade expansion, the transfer device realizes multi-level chain, star and mesh transmission network, and facilitates users to build high precision time service system for ground-based optical fiber.
Product function
1) the external reference input signals include one satellite signal, dedicated optical fiber signal and IRIG-B (DC) signal.
2) satellite selection function: there are six choices: GPS Beidou mixed time service, GPS&GLONASS mixed time service, Beidou GLONASS mixed time service, single GPS time service, single Beidou time service, single GLONASS time service to meet customer's demand for satellite signal timing.
3) work mode: including automatic mode, manual mode, punctual mode and so on three modes, in which the automatic mode indicates the priority selection of satellite signals, and then selects the IRIG-B signal; manual mode indicates that the external reference is manually selected by the user; the time keeping mode indicates that the external reference is not received, and the internal oscillator is used to carry out the time keeping;
4) system setup function: users set up baud rate, time zone and delay by pressing key.
5) automatically save various configuration states to meet all kinds of customer needs.
Product characteristics
A) has high cost performance, wide application and high time service accuracy.
B) a variety of timing interface output, which can be freely assembled and can output 120 groups of time service interfaces at the same time.
C) the overall power consumption is small, using no fan design, reliable and stable operation.
Typical application
1) mobile base station and ground high precision time transfer network.
Technical index
Input signal | GPS Beidou satellite signal | Frequency point L1, B1, timing accuracy is less than 30ns, tracking sensitivity is less than -160dBm | |
1 sets of 30 meters GPS Beidou dual-mode mushroom head antenna, including mounting bracket | |||
Dedicated optical fiber input | Dedicated optical fiber time interface | ||
Input options | IRIG-B (DC) code, IRIG-B (AC) code, NTP, PTP, CDMA, 10MHz, 1PPS, etc. | ||
output signal | Dedicated optical fiber output | Routes | 1 way |
Physical interface | Optical aperture | ||
Synchronization accuracy | Less than 10ns | ||
IRIG-B (DC) | Routes | 10 way | |
level | RS422/485 | ||
standard | IEEE1344 | ||
Synchronization accuracy | Less than 200ns | ||
Physical interface | Green screw terminals | ||
Network output | Routes | 1 way RJ45 | |
Timing accuracy | 1-10ms | ||
Support agreement | NTP v1.v2.v3&v4 (RFC1119&1305), SNTP (RFC2030), SNMP, IPV4, IPV6, IPv4/IPv6 Hybrid, SSH/SCP, SSH/SCP (E), (()), (()), ",", ",", "("), "("), "("), "("), "("), "("), ",", ",", ",", ",", ",", ",", "," | ||
User capacity | Support tens of thousands of clients | ||
throughput | 4000 times / sec | ||
1PPS pulse signal | Routes | 1 way TTL | |
Physical interface | BNC | ||
RS232C serial port | Routes | 1 way RS232C | |
Serial port format | RMC statement | ||
Relay alarm | Fault alarm | Green screw terminals | |
Out of step alarm | Green screw terminals | ||
Environmental characteristics | working temperature | 0 C ~ + 50 C | |
relative humidity | Less than 90% (40 C) | ||
Storage temperature | -30 C ~ + 70 C | ||
Power supply | AC 220V + 10%, 50Hz + 5%, power less than 30W | ||
Chassis dimensions | 4U, 19 "standard chassis (upper rack) 482mm (wide) X300 (deep) x176mm (high) | ||
Option | Rubidium atomic oscillator, lightning arrester, customized antenna cable, PTP/10MHz and other signals expand the output path, customize products with wide temperature range, and customize similar products according to customer requirements. |