Product overview
SYN6103 The CDMA sub clock is a sub clock designed and developed by Xi'an synchronous Electronic Technology Co., Ltd., which is designed and developed by ourselves. It acquires standard time signal information from CDMA network. It can be conveniently deployed in any place with CDMA signal, especially suitable for deploying occasions where it is not convenient to install GPS/ Beidou antenna.Zi Zhong has a backup battery which does not display when the power is cut off, but the internal clock can run continuously for 72 hours, that is to say, the power supply is restored within 72 hours, so there is no need to calibrate the time.To provide users with precise, standard, safe, reliable and multi-functional time service, it can be used for airports, railway stations, subways, gymnasiums, universities and financial systems to display standard time.
Key word : hospital clock system, station master clock, sub clock manufacturers, GPS sub clock.
Product function
1) CDMA signal is used to establish time reference.
2) Display contents: year, month, day, hour, minute, second, week, temperature and humidity;
3) Highlight digital display.
4) It can detect every fault and report the failure voluntarily.
Product characteristics
A) High cost performance and wide application.
B) The timing accuracy is high.
C) Strong anti-interference ability.
D) No need to transmit time antenna, and then work on power.
E) The overall power consumption is small, using no fan design, reliable and stable operation.
F) Bid farewell to traditional voltage drive, greatly extend the life of LED luminescent tube, ensure that the system has no obvious heating and hot phenomenon for a long time.
Typical application
1) Intelligent office buildings, high-grade living quarters and other occasions need to provide unified precise time service and centralized control of time.
2) The time unified system and all kinds of time display screens for power plant (station) and power grid center scheduling.
3) Hospitals, conference rooms and other needs
A place to display time;
4) Broadcasting and television
Field, railway station, subway, gymnasium, University and financial system.
Technical index
Input signal | Interface mode | CDMA signal 800MHz | |
Timing accuracy | Better than 1ms | ||
display | Luminous intensity of LED display unit | More than 200cd/ | |
contrast ratio | More than 10:1 | ||
Visual angle of LED display | More than or equal to 65 | ||
LED display MTBF | Equal to or equal to Eight 0000 hours | ||
Backup battery | Equal to or equal to 72 hours | ||
Display content (determined by size) | Days, days, minutes, seconds, weeks, temperatures, humidity, etc. | ||
Independent timing accuracy | Less than 0.2 seconds per day. | ||
Environmental characteristics | working temperature | 0 C ~ + 50 C | |
relative humidity | 20% to 85% (no condensation) | ||
Storage temperature | -30 C ~ + 70 C | ||
Power supply | AC 220V + 10%, 50Hz + 5% | ||
size | show contents | Single digital tube size | Whole machine size |
One: Display time division | 1.8 inches | 215*90*55mm (one side) 265*130*110mm (double faced) | |
2.3 inches | 265*105*55mm (one side) 315*145*110mm (double faced) | ||
3 inches | 340*120*55mm (one side) 390*160*110mm (double faced) | ||
4 inches | 475*150*55mm (one side) 525*190*110mm (double faced) | ||
5 inches | 525*175*55mm (one side) 575*215*110mm (double faced) | ||
One: Display time and seconds | 1.8 inches | 315*90*55mm (one side) 365*130*110mm (double faced) | |
2.3 inches | 380*100*55mm (one side) 430*140*110mm (double faced) | ||
3 inches | 510*120*55mm (one side) 560*160*110mm (double faced) | ||
4 inches | 730*150*55mm (one side) 780*190*110mm (double faced) | ||
5 inches | 800*175*55mm (one side) 850*215*110mm (double faced) | ||
The two alliance: Show days, days, minutes, and weeks. | 3+1.8 inches | 605*225*55mm (one side) 655*265*110mm (double faced) | |
4+1.8 inches | 695*245*55mm (one side) 745*285*110mm (double faced) | ||
5+2.3 inches | 750*280*55mm (one side) 800*320*110mm (double faced) | ||
Triad: Display time, month, day, time, minute and second temperature.humidity Week | 1.8+1 inches | 430*280*55mm (one side) | |
2.3+1.8 inches | 510*280*55mm (one side) 560*320*110mm (double faced) | ||
5+2.3 inches | 750*400*55mm (one side) 800*440*110mm (double faced) | ||
8+5 inches | 1600*800*100mm (one side) | ||
Option | Customized products according to customer requirements. |
Guide for selection of related products
Model | Input signal | output signal | characteristic | Other |
SYN6101 type RS485 sub clock | RS485 | Display days, months, days, minutes, seconds, temperature, humidity, weeks, etc. | High cost performance | Size and display contents can be customized. |
SYN6103 type CDMA sub clock | CDMA | Display days, months, days, minutes, seconds, temperature, humidity, weeks, etc. | Easy installation | Size and display contents can be customized. |
SYN6105 type GPS sub clock | GPS | Display days, months, days, minutes, seconds, temperature, humidity, weeks, etc. | High precision | Size and display contents can be customized. |
SYN6107 GPS Beidou double mode clock | GPS Beidou | Display days, months, days, minutes, seconds, temperature, humidity, weeks, etc. | Beidou time service | Size and display contents can be customized. |
SYN6109 type NTP sub clock | NTP | Display days, months, days, minutes, seconds, temperature, humidity, weeks, etc. | Network time service | Size and display contents can be customized. |
SY4505 standard synchronous clock | GPS Beidou GLONASS DC IRIG-B code | 10 road IRIG-B code, 1 NTP, 5 1PPM air contact, 5 1PPS air contact, 5 alarm. | Master clock Multiplex clock source | 4U, 19 ". AC220V, 30W |
SYN2136 Beidou NTP network time server | GPS Beidou | 1 road network port, 2 serial port, 1 road 1PPS | Master clock Beidou time service | 1U, 19 ". AC220V, 30W |
SYN2101 NTP network time server | GPS | 1 road network port, 2 serial port, 1 road 1PPS | Master clock High cost performance | 1U, 19 ". AC220V, 30W |
Option | Customized products according to customer requirements.Customize products with wide temperature range, and make similar products according to customer's requirements. |