- 产品详情
Product overview
SYN5610 The pulse signal generator is a multi-function, high reliability, special precision pulse signal and time interval generator designed and manufactured by Xi'an synchronous Electronic Technology Co., Ltd., which adopts direct digital synthesis technology, selects high precision constant temperature crystal vibration as the internal clock reference, carries out counting trigger or single trigger output for pulse signals, has multiple output channels and external trigger input channels, and external frequency input channels, and outputs a variety of pulse signals. It uses 7 inch LCD touch screen, adopts large scale integrated circuit FPGA technology, fully digital control, realizes high-precision pulse generation test, and has the advantages of high stability and high accuracy, perfect function, convenient operation and strong anti-interference ability.
Key word Signal pulse generator, double pulse generator, pulse generator, double pulse generator.
Product function
1) Switching between internal and external frequency standards.
2) Large touch screen for real-time display;
3) Single channel, dual channel, multi-channel output simultaneously.
4) Through the serial port can be directly set.
Product characteristics
A) Highly integrated and highly precise.
B) Good stability and reliable performance.
C) LCD panel is simple and intuitive.
Typical application
1) All metrological calibration departments and research institutes, etc.
2) Nanotechnology researchers, research and educational institutions, semiconductor and RF device design and development departments;
3) It is used for analyzing the characteristics of materials and devices.
Technical index
Input signal | External reference | Routes | One road |
frequency | 10MHz | ||
wave form | sine | ||
level | 5dBm~13dBm | ||
Physical interface | BNC | ||
output signal | Channel number | Two Lu BNC | |
Waveform characteristics | Single pulse and double pulse, logic forward and reverse pulse, positive and negative pulse. pulse | ||
Time characteristic | The pulse period range is 20ns to 10000s (frequency range: 0.1mHz to 50MHz). Time interval: 10ns ~ 10000s Resolution: 10ns Time interval error: + (T * 1 * 10-7+ 10ns) | ||
TTL Amplitude characteristics | TTL/CMOS Level: low level is less than 0.3V, high level is equal to 3.0V (high impedance load), output impedance is 50 ohms. | ||
Trigger characteristic | Trigger mode: internal trigger, external trigger, manual trigger. External trigger input: frequency: 1Hz ~ 1MHz (Fang Bo) Range: 1Vp-p ~ 10Vp-p Input impedance: greater than 100k ohm | ||
RS232C serial port | Routes | One road | |
level | RS232C | ||
Physical interface | DB9 | ||
Environmental characteristics | working temperature | Zero C ~ + 50 C | |
relative humidity | Less than 90% (40 C) | ||
Storage temperature | -30 C ~ + 70 C | ||
Power supply | AC 220V + 10%, 50Hz + 5%, power less than 75W | ||
Chassis dimensions | 4U 19 "standard chassis (upper rack) 482mm (wide) X300 (deep) x180mm (high) | ||
Option | Expand output routes, customize products with wide temperature range, and customize similar products according to customer requirements. | ||
Guide for selection of related products
Model | Input signal | Testing function | characteristic | Other |
SYN5104 type time integrated parameter tester | GPS Beidou | Time standard source, time difference measurement, time accuracy, frequency accuracy, message accuracy, Zhou Bo measurement, temperature and humidity measurement, time recording | Most time frequency signals can be tested. | 4U, 19 "(upper rack) AC220V, 30W |
Model SYN5106 high precision clock tester | GPS Beidou | Time standard source, time difference measurement, time accuracy, frequency accuracy, timing error measurement | Clock test of electric energy meter | 4U, 19 "(upper rack) AC220V, 30W |
SYN5301 millisecond meter time calibrator | 10MHz reference | Verification of mechanical stopwatch, electronic stopwatch, pointer type electric stopwatch, millisecond meter, digital electric stopwatch and so on, combined with 4 functions of stopwatch calibrator, day difference meter / calibrator, pointer type electric stopwatch calibrator, standard time interval generator and so on. | High accuracy and powerful function | 3U, 19 "(upper rack) AC220V, 30W |
SYN5301A type stopwatch verification fixture | Control electrical signal | Verification of mechanical stopwatch, electronic stopwatch, and various kinds of timer and other fixtures. | Flexible and convenient, high automation. | Module (360x110x140mm) |
SYN5301C precision photoelectric converter | One precision laser source, one high-precision photodetector, two sets of brackets. | High precision | AC220V power adapter | |
SYN5602 calibrator for electronic parking time charge device | GPS Beidou | At the same time, 1~18 electronic parking meter (parking meter) or parking area electronic time charge device can be checked at the same time. | The targets are all superior to the requirements of the national metrological verification regulation of JJG1010-2013 electronic parking timed tariff meter. | Portable suitcase AC 220V + 10% |
SYN5603 GPS time (event) recorder | GPS | 3 pulse time recording | High accuracy | 1U, 19 "(upper rack) AC 220V + 10% |
SYN5605 multi channel time interval measuring instrument | Reference 10MHz | Simultaneous measurement of 36 pulse signals | High precision, multi-channel simultaneous measurement | 3U, 19 "(upper rack) AC 220V + 10% |
SYN5605A digital time interval measuring instrument | Reference 10MHz | Measuring the time difference between 1 or 2 pulse signals | High precision time interval measurement | 3U, 19 "(upper rack) AC 220V + 10% |
SYN5605C type time correlated single photon counting system | Reference 10MHz | Simultaneous measurement of multiple pulses | PS magnitude accuracy | 3U, 19 "(upper rack) AC 220V + 10% |
SYN5607 type phase meter | The phase difference is measured at 0 degrees to 360 degrees or + 180 degrees. | Accuracy 0.1 degree | 3U, 19 "(upper rack) AC 220V + 10% | |
SYN5608 digital phase standard | Output two adjustable sine wave with high precision phase, ultra wide voltage range and ultra low distortion. | Accuracy 0.1 degree | 3U, 19 "(upper rack) AC 220V + 10% | |
Type SYN5610 pulse generator | Reference 10MHz | Single channel, dual channel output | High precision | 4U, 19 "standard chassis. |
SYN5619 phase noise analyzer | Phase noise and stability test for 500kHz-30MHz frequency simultaneously | Less than 1E-13/1S (5E-14/1s (typical value)) 1Hz@5MHz<-140dBc (<-145dBc (typical value)) | 4U, 19 "standard chassis. | |
Option | GPS Beidou dual-mode receiver, constant temperature crystal oscillator OCXO, rubidium clock, lightning arrester, customized antenna cable (50 meters, 80 meters, 100 meters, etc.), expand the output path, PTP measurement, NTP measurement, 4U standard chassis, network photoelectric conversion kit, according to customer requirements customized products.Customize products with wide temperature range, and make similar products according to customer's requirements. | |||
![WeChat](javascript: Mobi.showWeChatService("//661527.s21i.faiusr.com/2/ABUIABACGAAgqrCo4AUo2sDnvQcwggI4ggI.jpg",{"tips":"Scan QRcode"});){kind=link}