Product overview
SYN020-10MHz The constant temperature crystal oscillator outputs 1 low phase noise 10MHz sinusoidal signals.
Product characteristics
1) Small volume High cost performance;
2) Low phase noise
3) High reliability;
Typical application
A) Communications, navigation, radar, reconnaissance and other fields. 。
Technical index
frequency | 10MHz |
wave form | sine wave |
output power | More than 7dBm (50 ohm load) |
harmonic | Less than -30dBc |
stray | Less than -80dBc |
Factory calibration | Less than or equal to 0.01ppm |
Annual aging | Less than or equal to 0.5ppm |
Daily aging rate | Less than or equal to 0.5ppb |
temperature characteristic | Less than or equal to 0.01ppm |
Short term stability | Less than or equal to 0.01ppb/s |
Voltage stability | Less than or equal to 0.05ppm |
phase noise @ 10MHz @ 25 C + 2 C | Less than -125dBc/Hz @10Hz |
Less than -135dBc/Hz @100Hz | |
Less than -155dBc/Hz @1KHz | |
Less than -160 dBc/Hz @10KHz | |
Less than -160 dBc/Hz @100KHz | |
Traction range | More than or equal to 0.5ppm voltage control voltage 0 ~ 3.3V, positive polarity. |
working voltage | 5 + 5%VDC |
Working current | When less than 500mA starts, 5 minutes 0.05PPM |
Less than 200mA @25 C, steady state | |
working temperature | -40 ~ +70 C |
Storage temperature | -55 ~ +85 C |
Package size | 20*20*11 Max.mm |
Package size map: