Wifi automatic clock is a clock that can be used to transmit the clock without receiving any WiFi signal. It is mainly used in places where the wiring is not convenient.

As a professional time service manufacturer, we usually recommend users. If the clock system project is the design stage of the new building, the screen line is not a problem. It is recommended that the wired NTP network master clock system be preferred. If it is the old building that has been renovated for a long time and needs to increase the clock, it is impossible for the whole project to achieve cabling without regard to manpower and material resources or the actual environment on the site. Users of the objective environment can choose WiFi automatic time clock that only needs power supply.

The reason is that the cable NTP network sub clock and WIFI sub clock, to some extent, the stability is good, the accuracy is high. The only trouble is that every point on the network clock must be reserved for a cable and 220V power line. Of course, if the Poe is powered, it will only be necessary if the cable is supplied.

The clock source of the Wifi clock can be obtained from the NTP time server in the supporting LAN, or it can be obtained directly through the public server on the Internet site. The biggest advantage of WiFi wall clock is that it doesn't need wiring, as long as there is WiFi.

The Wifi clock changes the configuration through the webpage management background when debugging, specifying the superior server. After the power distribution is configured, the NTP mode is automatically connected to the network without time adjustment. But compared with the wired NTP network master clock system, the WiFi is more stable and accurate.

Although the WiFi clock is simple and convenient to use and save construction costs, it is impossible to use the WiFi clock if it is in the school examination room, because the signal shield is an essential tool for every examination room to escort the information safety of the examination room. While shielding cell phone signals, WiFi signals will be shielded and unable to communicate normally. So if you are a school project, please select the cable network sub clock.

The recommended WiFi clock is SYN6123 type. Please confirm the following points according to the situation of the site.

1. WiFi automatic time clock source is obtained from local NTP time server or directly from the Internet.

2. Determine the size and display content of the sub clock. It only shows when the time is divided or 2.

3, determine the WiFi clock's single and double sides (one side is usually wall hanging, two side is hanging).

Xi'an's synchronous WiFi clock is strictly tested and tested before leaving the factory. For example, high and low temperature test, vibration test, light brightness test. Product quality is guaranteed, good reputation, if necessary, please contact our staff.

The copyright of this article belongs to Xi'an in all respects, respecting originality, strictly prohibit manuscript, unauthorized, no reprint, copyright, infringement must be investigated!